thermapen classic thermometer with strong penetration probe

The Thermapen Classic strong penetration probe thermometer provides the same benefits as the Thermapen Classic thermometer, but comes with a general purpose strong temperature probe, rather than the reduced tip. It is ideal for insertion into both solids and liquids.  The Thermapen® Classic penetration probe thermometer incorporates a large digital display with a precise read-out over the range of -49.9 to 299.9 °C with a 0.1 °C resolution and an accuracy of ±0.4 °C. The resolution can be switched to 1 °C, if required, via a switch in the battery compartment. The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are also displayed, when applicable. Each Thermapen® is powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours. The thermometer probe, conveniently folds back through 180 degrees into the side of the instrument when not in use. The casing is washable and includes 'Biomaster' additive that reduces bacteria growth and the ergonomic rubber seal minimises the risk of the ingress of water, dust or food. Thermapen® is a registered trademark in the UK (2025607), EU (008449571) and the USA (3898535). It is also protected by EC Regd.Des.No. 001580473.

range:	-49.9 to 299.9°C
resolution:	0.1 °C or 1°C - user selectable
accuracy:	±0.4°C (-49.9 to 199.9 °C) ±1 °C (200 to 300°C)
battery:	2 x 3 volt CR2032 lithium coin cell
battery life:	1500 hours
sensor type:	K thermocouple
display:	14.5mm LCD
dimensions:	19 x 47 x 153mm
weight:	97 grams
case material:	ABS plastic with Biomaster anti-bacterial additive
country of manufacture:	United Kingdom
guarantee:	two years
measurement scale:	Celsius/Fahrenheit
certification:	FREE traceable calibration certificate
conforms to standard:	EN 13485