Description
The Thermapen Classic thermometer boasts a sizeable digital display, providing precise temperature readings within the range of -49.9 to 299.9 °C, with a 0.1 °C resolution and an accuracy of ±0.4 °C. To maximise battery life, the thermometer automatically powers off after ten minutes, and its configuration is fully customisable using switches in the battery compartment. Options include disabling the auto-off mode, choosing between °C or °F scales, and selecting 1° or 0.1° resolution.
The washable casing, enhanced with 'Biomaster' additive, reduces bacterial growth, and the ergonomic rubber seal minimises the risk of water, dust, or food ingress. Despite being splash-proof, it remains one of the fastest contact thermometers on the market, delivering accurate product temperatures in just three seconds. Low battery (icon) and open circuit indications are displayed when applicable.
Powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours, the Thermapen® Classic thermometer features a reduced tip, stainless steel, Ø3.3 x 115 mm food penetration probe that conveniently folds back through 180 degrees when not in use. Tested in the ETI calibration laboratory, the Thermapen® Classic exhibited an impressive response time of reaching 100% of the test temperature in just three seconds.
Registered as a trademark in the UK (2025607), EU (008449571), and the USA (3898535), the Thermapen® is also protected by EC Regd.Des.No. 001580473. Each unit comes with a FREE traceable certificate of calibration. Designed with colour-coding in mind, there is a specific Colour-coded Thermapen for chefs, cooks, and caterers, allowing for HACCP and due diligence procedures to reduce the risk of cross-contamination. Alternatively, different staff members can use thermometers of various colours.
Technical Datasheet
Range: | -49.9 to 299.9°C |
Resolution: | 0.1 °C or 1°C - user selectable |
Accuracy: | ±0.4°C (-49.9 to 199.9 °C) otherwise ±1 °C |
Battery: | 2 x 3 volt CR2032 lithium coin cell |
Battery life: | 1500 hours |
Sensor type: | K thermocouple |
Display: | 14.5mm LCD |
Dimensions: | 19 x 47 x 153mm |
Weight: | 97 grams |
Case Material: | ABS plastic with Biomaster anti-bacterial additive |
Country of Manufacture: | United Kingdom |
Guarantee: | two years |
Measurement Scale: | Celsius/Fahrenheit |
Certification: | FREE traceable calibration certificate |
Conforms to Standard: | EN 13485 |
Related products
£78.00
£45.00
£140.00