challenge all versatile cleaner and degreaser

Challenge All Versatile Cleaner and Degreaser

£0.00 In Stock Sold out

Volume:
Quantity:

5 litres
4

Challenge All is a highly versatile, biodegradable cleaner and degreaser. Challenge All can be used on all water safe surfaces as a safe alternative to many caustic and citrus based cleaners. 

Highly economical in use, 100% biodegradeable and non-caustic.

Challenge All is:

  • Fast acting
  • Low foaming
  • Safe in use
  • 100% biodegradable
  • Non-caustic

Challenge All can be applied manually or used in conjuction with floor scrubbing equipment  to remove a wide range of build ups including Carbon, Fats, Oils, Greases, Rubber Scuff Marks.

Typical uses:

  • Removing diesel blooms from road surfaces
  • Removing heavy oil contamination from asphalt, tarmac, concrete, safety flooring, painted floors and metal

How to use Challenge All

  1. Dilute Challenge All between 1:10 and 1:20 (depending on build up)
  2. Spray Challenge All onto the area to be cleaned
  3. Allow Challenge All to penetrate for a few moments
  4. Wipe off using a clean, dry cloth
  5. A second application may be necessary on heavy build-ups

Road Spill Cleanup

  • Dilution: Between 1:30 and 1:50 for oil blooms / rainbows.
  • Application: Can be diluted into a knapsack sprayer or road sweeper to remove blooms caused by fuel spills.
    For very slippy areas, a stronger dilution may be required. The road can then be dressed with BioCat™ to provide additional traction.

Floor Scrubbing

  • Dilution: Between 1:50 and 1:75 dependant on whether a deep clean or maintenance clean is required.
  • Application: Pre-spot any stubborn marks. Dilute Challenge All into a floor scrubbing machine and follow normal cleaning procedures. Challenge All has been developed to be used on a wide variety of flooring including safety, vinyl, resin and polyurethane surfaces. Challenge All also has a built in anti-foaming agent to prevent machine clogging.

Tips

  • To remove rubber scuff marks, spray Challenge All neat onto the mark. Leave to penetrate and scrub with an abrasive pad.